MORRFlate TenSix PSI Pro 12V Portable Air Compressor
Set your PSI and walk away!
Air up a set of 35″ tires from 10 to 40 psi in under 5min (when combined with a MORRFlate 4 Tire Inflation & Deflation™ Kit)
10.6 CFM dual cylinder compressor at 0 PSI
6.5 CFM at 30 psi
Braided wire hose with quick connect
10-120 psi in Auto Mode
1-150 psi in Manual Mode
Thermal Cutoff Switch & Purge Valve
80% Duty Cycle @ 0 psi (45min on 15 min off) (6-8 Vehicles) (see duty cycle chart)
12v, 90amps peak, ~50amp running
14x7x9″ external dimensions
70-75 dB noise level from 1ft distance
Beefed up carrying bag with accessory pockets
Threaded filter caps so the compressor can now be mounted in any direction/orientation (except upside down)
USA Standard color matched air fitting – “Universal” Coupler (Works with 1/4″ Industrial, Auto, or Aro fittings)
WARNING: Compressors get hot!
Since the TenSix™ is rated for 10.6 CFM, it is highly recommended to use with a MORRFlate 4 Tire Inflation & Deflation™ Kit to avoid back pressures on the compressor from filling 1 tire at a time.
For reference, the TenSix PSI Pro™, combined with a MORRFlate Quad Hose Kit, will fill a set of 35″ tires from 10 psi to 40 psi in under 5 minutes… without you doing anything!
This beast will take care of all of your portable off road air needs. 58% faster than a Twin ARB! The big story that makes the TenSix™ shine, is what happens when you combine it with a MORRFlate 4 Tire Kit™:
Regular tire valve stems (and most after market valve stems) use a valve core called a “Schrader Valve”. With the Schrader Valve still inside your tire’s valve stems, that makes an opening of roughly 1/16” (or smaller!). 1/16″ openings are only rated for about 1.8 to 2 CFM (cubic feet per minute) of air flow at 20 psi (now, that CFM rating goes up as you “push” with more pressure, such as a CO2 tank, or a pressurized on board air tank, and it goes down as far as .8 CFM at 0 psi). By running straight off of a compressor with no tank in the mix, your tires can only really accept about 2 CFM of air flow at a time. So, by using other popular compressors on the market that flow 5.65 CFM or 6.2 CFM, and doing 1 tire at a time, you aren’t able to get the full use and output of those compressors due to the bottleneck of air flow at your tire’s valve stem. The “useable CFM” while doing 1 tire at a time is really only 2-3 CFM for the pressures that we run in tires while off roading. That means that not only are you not getting the best efficiency from your compressor, but you are creating a backlog of pressure on your compressor, making it work harder, and possibly fail prematurely.
Comparing a TenSix™ on a MORRFlate 4 Tire Quad Kit, to a ARB TWIN compressor on a single tire, you wont see just a 58% decrease in air up times, you should see a theoretical 300-400% decrease in air up times! Pretty crazy! Do your own comparisons and let all of your friends know your feedback!
Note About This Product: This compressor is designed for 4 tyre inflation. You can still air up a single flat if you need to, but the duty cycle dwindles to 8-10min doing 1 tyre at a time. It just simply puts out too much air and is optimized for 4 tyres at a time.